Care & Maintenance

Care & Maintenance Form

Due to the non-porous surface of the finish, there is no need to use abrasive cleaners. Any household liquid detergent will give you excellent results. To remove mineral stains, use mild acid solution such as a liquid bow cleaner. All organic coatings must cure. They start to cure from the time of application for a total of several weeks.

DO NOT DO LIST:

• Do not use the surface for 48 hours from the time of refinishing for solvent base chemical.
• Do not leave soap or shampoo on refinish surfaces for a long period of time.
• Do not use abrasive cleaner such as S-O-S pads, Comet, Soft Scrub, and Bleach.
• Do not use bath mats with suction cups.
• Do not pick surface dust with fingers. Any suface dust will dissipate in 3-4 weeks with normal cleaning
• Do not allow a leaking faucet

DO LIST:

• Clean thoroughly once a week.
• Cleaning Chemicals: Lysol basin & Tile, Simple Green, and Mr. Clean Liquid

Universal Refinish recommends diluting Simple Green with water. The ratio of mixing is 1 to 1.